افتخار میکنیم که از سال ۱۹۶۴ مالکیت و اداره کانادایی داشتهایم.
Diablo D1080N 10 in. x 80-Tooth Saw Blade for Non-Ferrous Metal and Plastic, 5/8 in. Arbor
*فقط قیمتگذاری آنلاین
Diablo D1080N 10 in. x 80-Tooth Non-Ferrous Metal and Plastic Saw Blade
The Diablo D1080N is a 10 in. carbide-tipped blade with 80 triple chip grind teeth, made for cutting aluminum, other non-ferrous metals and plastics on a miter saw, sliding miter saw or table saw with a 5/8 in. arbor.
The triple chip grind shears the cut cleanly and leaves little burr. Laser-cut stabilizer vents and a Perma-SHIELD non-stick coating keep the plate quiet and cool in the cut.
Not a wood-framing blade. Use it on aluminum extrusion, plastic sheet and similar stock, and pick a lower tooth count for rough lumber.
Features and Common Uses
- 80 teeth, triple chip grind, for a smooth cut in non-ferrous metal and plastic
- TiCo high-density carbide teeth
- Laser-cut stabilizer vents reduce vibration
- Perma-SHIELD non-stick coating reduces heat and pitch build-up
- Fits 10 in. miter saws, sliding miter saws and table saws
Commonly used for:
- Cutting aluminum extrusion and plate
- Cutting copper, brass and other non-ferrous stock
- Cutting plastic sheet, fiberglass and melamine
Specifications
| Brand | Diablo (Freud) |
|---|---|
| Model | D1080N |
| Diameter | 10 in. |
| Teeth | 80 |
| Grind | Triple chip grind (TCG) |
| Arbor | 5/8 in. |
| Kerf | 0.094 in. |
| Maximum speed | 7,000 RPM |
| Tooth material | TiCo high-density carbide |
| Coating | Perma-SHIELD non-stick |
| Per package | 1 blade |
Specifications are from the Home Depot listing, which carries Diablo's published copy, and from Tool Nut. The Home Depot page lists the carbide and arbor; kerf and speed are from Tool Nut. Source: Diablo D1080N 10 in. x 80-Tooth Non-Ferrous Plastic Cutting Saw Blade.
Frequently Asked Questions
Can I use this blade on aluminum?
Yes. Aluminum is its main use, including thin, medium and thick extrusion on a miter or table saw.
Will it fit my saw?
It fits any saw that takes a 10 in. blade with a 5/8 in. arbor.
Can I cut wood with it?
It can cut melamine and wood, but a lower tooth count blade cuts lumber faster.