CAMO Edge Hidden Deck Fastening Clips - Wood Joists

• 305 stainless steel gusset and screw, nylon plastic spacer body
• Black coating tested to the ASTM B117 salt spray corrosion standard
• Sets a 3/16 in. (4.7 mm) board-to-board gap
• Fastener: #7 x 1-3/4 in. overall length, 0.200 in. shank, T-15 star drive
• Deck board groove needed: 1/8 in. tall x 1/4 in. deep minimum, 1/4 in. minimum material below the groove
• 50 sq. ft. box: 90 clips, 90 screws and driver bits, 8 boxes per case
• 500 sq. ft. pail: 900 clips, 900 screws and driver bits, 64 pails per lift, includes the NEVER-MISS guide
• At 12 in. on-centre framing, coverage drops to about 37 sq. ft. per 50 sq. ft. box

Edge is part of CAMO's Universal Deck Clip system, so the same T-15 bit, CAMO Lever board-straightening tool and CAMO ClipDRIVE stand-up tool cross over to WedgeClip and WedgeMetal as well.

Works with grooved boards from Trex, TimberTech by AZEK, Fiberon and Deckorators.

Hand-drive with the included T-15 bit and a drill, using the NEVER-MISS guide on the 500 sq. ft. pail to keep each clip square to the joist. For a full crew, the CAMO ClipDRIVE tool converts the same clip to a stand-up install. Follow CAMO's current Universal Deck Clip installation guide for joist spacing and clip placement.

Edge or WedgeClip - what's the difference?
Edge fastens standard 90 degree deck patterns. WedgeClip costs a little more per box and handles any pattern, including diagonal and herringbone.

Wood or metal joists?
Edge is for wood joists. For 14 to 18 gauge steel framing, use CAMO WedgeMetal.

What ships in the box?
90 clips, 90 stainless screws and CAMO driver bits, enough for 50 sq. ft. at standard 16 in. on-centre framing.

Does the pail include a guide?
Yes, the 500 sq. ft. pail includes the NEVER-MISS placement guide. The 50 sq. ft. box does not.