پرش به محتوا
افتخار می‌کنیم که از سال ۱۹۶۴ مالکیت و اداره کانادایی داشته‌ایم.
افتخار می‌کنیم که از سال ۱۹۶۴ مالکیت و اداره کانادایی داشته‌ایم.

Lumber Lock Subfloor & Construction Adhesive 825mL, Case of 12

توسط Lumber Lock
پیش‌خرید
قیمت اصلی $155.88 - قیمت اصلی $155.88
قیمت اصلی
$155.88
$155.88 - $155.88
قیمت فعلی $155.88

سفارش ویژه - ۴۸ ساعت برای تحویل یا دریافت

Lumber Lock Subfloor & Construction Adhesive 825mL, Case of 12

Lumber Lock is a heavy-duty subfloor and construction adhesive that guns easily in the cold and resists running in the heat. It bonds subfloor sheathing to joists and stays flexible to help keep the floor quiet. This case holds 12 cartridges of 825 mL (28 oz).

Features and Common Uses
  • Stays flexible to bridge framing irregularities and keep floors quiet
  • Bonds to wet, frozen and pressure-treated lumber
  • Easy to gun in cold weather; resists running in heat
  • Freeze/thaw stable; not damaged by freezing

Commonly used for:

  • Gluing plywood and OSB subfloor to joists
  • Stairs, treads, risers and stringers
  • Decks, fences, porches and patios
  • Reducing joist hanger noise (add a small amount before setting the joist)
Specifications
Product Specifications
Brand Lumber Lock
Manufacturer Katabatic Manufacturing (KM Corp)
Product No. E62
Type Synthetic polymer (mastic) subfloor and construction adhesive
Colour Tan
Cartridge Size 825 mL (28 oz)
Cartridges per Case 12
Application Temperature -17°C to 49°C (0°F to 120°F)
Service Temperature -34°C to 59°C (-30°F to 138°F)
Open Time 20 minutes
Cure 24-48 hours before heavy traffic
VOC 399 g/L
Coverage per Cartridge approx. 39 ft of 3/8 in. bead, 86 ft of 1/4 in. bead, 355 ft of 1/8 in. bead
Standards CAN/CGSB-71.25M, CAN/CGSB-71.26M, APA AFG-01; Class 1/8 in., Type P/O per ASTM D3498-19
Shelf Life 18 months, unopened

Specifications are from the manufacturer's technical data sheet. Source: Lumber Lock Technical Data Sheet V8.24 (PDF).

How to Install
  1. Precut lumber and prepare all materials first. Remove loose ice, snow, water, mud, sawdust and debris.
  2. Cut the tip on a slant for a 3/8 in. bead and puncture the inner seal.
  3. Run a continuous bead on one surface. Where sheathing ends meet on a joist, use a zig-zag bead under each panel.
  4. Press the surfaces together with a slight twist and complete bonding within 20 minutes.
  5. Apply adhesive for one sheet at a time, leave 1/8 in. expansion gaps at panel ends and edges, and nail or screw at all supports per local code.

Do not use on plastics, polystyrene or polyethylene foams, or to bond two non-porous materials. Clean tools with mineral spirits. Source: Lumber Lock Technical Data Sheet V8.24 (PDF).

Frequently Asked Questions
How many cartridges are in a case?

12 cartridges of 825 mL (28 oz).

Can I use it in cold weather?

Yes. It can be applied from -17°C (0°F) up to 49°C (120°F).

Does it work on wet or treated lumber?

Yes. It bonds to wet, frozen and pressure-treated lumber.

How long before the floor can take heavy traffic?

Allow 24-48 hours.