افتخار میکنیم که از سال ۱۹۶۴ مالکیت و اداره کانادایی داشتهایم.
EAB Stay Sharp 7 in. x 1/8 in. Masonry Cut-Off Wheel, Type 1 (2141112)
*فقط قیمتگذاری آنلاین
EAB Stay Sharp 7 in. x 1/8 in. Masonry Cut-Off Wheel, Type 1
A 7 in. x 1/8 in. Type 1 abrasive cut-off wheel from EAB's Stay Sharp Professional line, for cutting masonry, concrete, block and tile on a circular saw. The 5/8 in. arbor hole is reinforced with a wide aluminum flange for strength.
Rated 8,600 RPM. Use it only on a tool whose rated speed is at or below that figure, with the guard in place.
A Type 1 cut-off wheel is for straight cuts only. Do not grind with the face of the wheel.
Features and Common Uses
- 7 in. diameter, 1/8 in. thick, 5/8 in. arbor
- Type 1 flat profile
- Rated 8,600 RPM
- Reinforced arbor hole with a wide aluminum flange
- EAB Stay Sharp Professional grade
Commonly used for:
- Cutting brick and concrete block
- Cutting concrete, pavers and asphalt
- Cutting tile, stone and fibreglass
Specifications
| Brand | EAB Stay Sharp |
|---|---|
| EAB item number | 2141112 |
| Diameter | 7 in. |
| Thickness | 1/8 in. |
| Arbor | 5/8 in. |
| Wheel type | Type 1 |
| Rated speed | 8,600 RPM |
| Tool | Circular saw |
| Materials | Masonry, concrete, concrete block, pavers, tile, granite, marble, slate and terrazzo |
Specifications are from EAB's product page for item 2141112. Griff item B14111 matches it by UPC. Always confirm the maximum RPM printed on the wheel against your tool's rated speed before use. Source: EAB Stay Sharp 2141112 product page.
Frequently Asked Questions
What tool does it fit?
A circular saw that takes a 7 in. wheel on a 5/8 in. arbor and runs at no more than 8,600 RPM.
Will it cut steel?
No. It is a masonry wheel. For steel use a metal cut-off wheel, such as the EAB 7 in. x 1/8 in. metal wheel.
Can I grind with it?
No. Type 1 cut-off wheels are thin and made for cutting with the edge only. For grinding use a 1/4 in. Type 27 depressed centre wheel.