自1964年以来，加拿大拥有并运营，引以为傲
Milwaukee SHOCKWAVE Impact Duty RED HELIX Titanium Drill Bit, 1/4 in. Hex Shank
*仅限线上定价
Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit, 1/4 in. Hex Shank
The SHOCKWAVE RED HELIX is Milwaukee's titanium-coated twist drill bit for impact drivers and drills. It has a 1/4 in. hex shank that locks straight into a quick-change impact chuck, and a 135 degree split point that starts on the mark without a centre punch.
One product page covers seven fractional sizes, each a single bit. The variable helix runs from 35 degrees at the tip to 15 degrees up the flute, which clears chips quickly and keeps heat down in metal.
1/4 in. hex shank only. These bits fit impact drivers and hex-shank chucks, not a standard three-jaw chuck that needs a round shank.
Features and Common Uses
- Titanium coating for longer bit life than black oxide bits
- Quad Edge tip gives a precise start and four cutting edges that make smaller chips
- Variable helix, 35 degrees at the tip tapering to 15 degrees, for fast chip removal
- Tapered web adds strength and reduces breakage
- 135 degree split point stays on the mark without walking
- 1/4 in. hex shank for impact drivers and quick-change chucks
Commonly used for:
- Drilling pilot and clearance holes in steel, stainless steel, cast iron and aluminum
- Drilling duct and sheet metal
- Wood and plastic where an impact driver is the tool at hand
Specifications
| Bit diameter | Overall length | Flute length |
|---|---|---|
| 5/32 in. | 2.75 in. | 1.01 in. |
| 9/32 in. | 4.25 in. | 2.54 in. |
| 5/16 in. | 4.375 in. | 2.61 in. |
| 21/64 in. | 4.49 in. | 2.73 in. |
| 23/64 in. | 4.61 in. | 2.85 in. |
| 3/8 in. | 4.65 in. | 2.87 in. |
| 7/16 in. | 4.92 in. | 3.12 in. |
Dimensions are from each size's Milwaukee product page. Item numbers run 48-89-4607 (5/32 in.) through 48-89-4625 (7/16 in.). Source: Milwaukee 48-89-4621 3/8 in. SHOCKWAVE RED HELIX Titanium Drill Bit.
Frequently Asked Questions
Do these fit a regular drill?
Only if the drill has a hex chuck or you use a hex-to-round adapter. The shank is 1/4 in. hex on every size.
What materials can I drill?
Steel, stainless steel, cast iron, aluminum and sheet metal, plus wood and plastic.
Does one order include several bits?
No. Each size is a single bit.
Where are the smaller sizes?
This page lists the sizes we stock from 5/32 in. up to 7/16 in. Ask us if you need a size that is not listed.