Tools

Dixon Ticonderoga Hex Lumber Crayon, 4-1/2 in. x 1/2 in. Dixon Ticonderoga hex lumber crayon, 4-1/2 in. x 1/2 in. It marks wet or dry wood, metal...

Stanley 84-026 8 in. Bi-Material Slip Joint Pliers Stanley 84-026 slip joint pliers, 8 in. long, forged alloy steel with a serrated jaw and a com...

Stanley 84-034 8 in. Bi-Material Groove Joint Pliers Stanley 84-034 groove joint pliers, 8 in. long, with a curved jaw, 1-1/2 in. capacity and an...

Truper Cutter Mattock Head, 5 lb, Hoe and Cutter Blade (No Handle) Truper's replacement cutter mattock head: a hoe blade on one end and a cutter ...

Stabila 20070 End Caps for Type 196 / 96M Levels, Set of 2 A set of two end caps for Stabila Type 196 and 96M levels. The caps help the level gri...

Pocket multi tool with an anodized aluminum body and tools made from 420 stainless steel, on a key ring. Functions: knife blade, bottle opener, can...

1/4" replacement pilot drill that fits all mandrels and is easily replaced. Shank: 1/4" Length: long Material: steel

Threaded adapter that lets a 1/4" mandrel be used with 1-1/4" to 7-7/8" hole saws for light duty cutting. For best results with hole saws over 1-1/...

Quick change 3/8" hex mandrel for a 3/8" drill. Accepts hole saws from 1-1/4" to 7-7/8". A mandrel is required for all hole saws. Comes with a high...

1/4" shank round mandrel that fits hole saws from 9/16" to 1-3/16". Larger sizes require an adapter. A mandrel is required for all hole saws. Comes...

Type 1 flat metal cutting wheels for angle grinders, sold as a 10 pack. Cuts stainless steel, ferrous metals, aluminum, wall tiles, slate and marbl...

Multipack of brass coated wire cups, wheels and end brushes with 1/4" shanks for electric drills. For light duty cleaning, deburring and rust remov...

Crimped brass wire wheels for bench grinders. For surface cleaning and finishing, deburring, paint and rust removal on ferrous and non-ferrous meta...

Brass coated steel crimped wire wheels with a 1/4" shank for electric drills. For light duty cleaning, deburring and rust removal on ferrous and no...

Wire cup brushes with a 1/4" shank for electric drills. For light duty cleaning, deburring, rust removal and surface preparation of large areas, on...

Carbon steel knotted wire cup brush for angle grinders with an M10 x 1.25 arbor. For heavy duty cleaning, deburring and rust removal, plus weld sca...

Stainless steel knotted wire cup brush for angle grinders. Specifically recommended for use on stainless steel, and on ferrous and non-ferrous meta...

Knotted wire cup brushes for angle grinders with a 5/8"-11 threaded arbor. For heavy duty cleaning, deburring and rust removal, plus weld scale and...

Crimped wire cup brushes for angle grinders with a 5/8"-11 threaded arbor. For heavy duty cleaning, deburring and rust removal, plus weld scale and...

Industrial-grade 7/16" nutsetter, 2 in. long with a 1/4" hex shank, colour coded for easy identification. Made from special alloy steel, heat treat...

Industrial-grade Phillips power bits with a 1/4" hex shank, colour coded for quick identification. Made from special alloy steel, heat treated for ...

Industrial-grade square recess (Robertson) power bits with a 1/4" hex shank, colour coded for quick identification. Made from special alloy steel, ...

Task Sanding Belt Cleaner Task sanding belt cleaner, a 2 in. x 2 in. x 4 in. block that cleans abrasives while the sander is still running. Feat...

Task Solvent-Free Eco Super Contour Sanding Pad, 2-Pack Task solvent-free eco super contour foam sanding pads for hand sanding curved and shaped ...

Task Solvent-Free Eco Single-Sided Sanding Pad, 3-Pack Task solvent-free eco single-sided foam sanding pads for hand sanding wood and solid surfa...

Task 6" Hook & Loop Sanding Discs, 4-Pack Task 6 in. aluminum oxide sanding discs with a hook and loop backing and 6 dust extraction holes. S...

Task 4" x 24" Aluminum Oxide Sanding Belt Task aluminum oxide sanding belt, 4 in. x 24 in., for portable belt sanders. Use it on wood and metal, ...

Task 3" x 24" Aluminum Oxide Sanding Belt Task aluminum oxide sanding belt, 3 in. x 24 in., for portable belt sanders. Use it on wood and metal, ...

Task 3" x 21" Aluminum Oxide Sanding Belt Task aluminum oxide sanding belt, 3 in. x 21 in., for portable belt sanders. Use it on wood and metal, ...

Task 3" x 18" Aluminum Oxide Sanding Belt Task aluminum oxide sanding belt, 3 in. x 18 in., for portable belt sanders. Use it on wood and metal, ...

Olfa AB-10B 9 mm Snap-Off Replacement Blades, 10-Pack Ten general-purpose 9 mm snap-off blades for Olfa and other 9 mm snap-off knives. Each blad...

Olfa 180 Standard-Duty 9 mm Snap-Off Utility Knife, Metal Handle The Olfa 180 is a slim 9 mm snap-off knife with an all-metal body. It ships with...

Sharpie Fine Point Permanent Markers, Black, 2-Pack A two-pack of black Sharpie permanent markers with a fine point tip, for narrow lines, small ...

Sharpie Chisel Tip Permanent Markers, Black, 2-Pack A two-pack of black Sharpie permanent markers with a chisel tip. The tip draws a broad line o...

Irwin Strait-Line Permanent Marking Chalk, Midnight Black, 6 oz Irwin Strait-Line permanent marking chalk in midnight black comes in a 6 oz squee...

Irwin 5.91 in. Line Level, Aluminum The Irwin aluminum line level hangs on a string line to check that the line is level over a long run. The bod...

Irwin 5.91 in. Line Level, ABS The Irwin line level hangs on a string line to check that the line is level over a long run. The ABS body is 5.91 ...

Irwin 8 in. Stainless Steel T-Bevel The Irwin 8 in. T-bevel has a stainless steel blade for transferring angles from one surface to another, and ...

Irwin 6-1/2 in. Standard Jab Saw, Hardwood Handle The Irwin standard jab saw has a 6-1/2 in. high carbon steel blade with bi-ground teeth and a r...

Irwin ProTouch 6-1/2 in. Premium Jab Saw The Irwin ProTouch jab saw has a 6-1/2 in. high carbon steel blade with aggressive triple ground teeth f...

Irwin 15 in. Universal Hand Saw, Coarse Teeth The Irwin universal hand saw has a 15 in. high carbon steel blade with triple ground teeth and an e...

Irwin Vise-Grip 8-1/2 in. Multi-Tool Wire Stripper/Crimper/Cutter The Irwin Vise-Grip CM8 strips, crimps and cuts wire from 22 to 10 AWG in one 8...

Irwin Vise-Grip 12 in. Groove Joint Pliers The Irwin Vise-Grip 12 in. groove joint pliers have a curved jaw with a 2-1/4 in. nominal capacity and...

Irwin Vise-Grip 10 in. Groove Joint Pliers The Irwin Vise-Grip 10 in. groove joint pliers have a curved jaw with a 2 in. nominal capacity and Pro...

Irwin Vise-Grip 8 in. End Cutting Pliers The Irwin Vise-Grip 8 in. end cutting pliers have nickel chromium steel jaws that cut at the tip, for tr...

Irwin Vise-Grip 9-1/2 in. Lineman's Pliers The Irwin Vise-Grip 9-1/2 in. lineman's pliers combine a high-leverage jaw with a built-in side cutter...

Irwin Vise-Grip 6 in. Long Nose Pliers with Side Cutter The Irwin Vise-Grip 6 in. long nose pliers reach into tight spots and hold small parts wi...