自1964年以来，加拿大拥有并运营，引以为傲
DAP 100% Silicone Rubber Kitchen, Bath & Plumbing Sealant, 290 mL
*仅限线上定价
DAP 100% Silicone Rubber Kitchen, Bath & Plumbing Sealant, 290 mL
DAP 100% Silicone Rubber Kitchen, Bath & Plumbing Sealant is an unfilled silicone that stays flexible and resists cracking around sinks, tubs, showers, backsplashes and countertops. It comes in a 290 mL cartridge for a standard caulk gun, in clear or white. Cured sealant resists mould and mildew and can be exposed to water after 12 hours.
Not paintable. Silicone will not take paint, so paint the surface before you seal it. For exterior windows, doors and siding, see the DAP 100% Silicone Window & Door sealant.
Features and Common Uses
- 100% silicone rubber with no filler, 97% solids, for a flexible, waterproof seal that resists cracking
- Cured sealant resists mould and mildew
- Tack-free in 10 to 20 minutes, ready for water in 12 hours, fully cured in 24 hours
- Safe for incidental food contact once cured and washed (FDA 21 CFR 177.2600)
- Interior use only
- Bonds to glass, ceramic, porcelain, fibreglass, aluminum, wood, vinyl and most plastics and rubbers
Commonly used for:
- Sinks, tubs and showers
- Backsplashes, vanities and countertops
- Fixtures and loose tile repairs
Specifications
| Brand | DAP |
|---|---|
| Product | 100% Silicone Rubber Kitchen, Bath & Plumbing Sealant |
| Item Number | 73444 (Clear), 73446 (White) |
| Size | 290 mL (9.8 fl. oz.) cartridge |
| Base | Silicone rubber, unfilled, 97% solids |
| Coverage | About 15 linear m (53 linear ft.) at a 3/16 in. bead |
| Maximum Joint Width | 1/2 in. (13 mm) |
| Tooling Time | 5 to 10 minutes |
| Tack-Free Time | 10 to 20 minutes |
| Water Ready | 12 hours |
| Full Cure | 24 hours |
| Application Temperature | -37 to 60 °C |
| Service Temperature | -40 to 176 °C continuous |
| Paintable | No |
| Shelf Life | 24 months unopened |
Figures are from DAP's technical data sheet for this sealant. Source: DAP 100% Silicone Kitchen & Bath technical data sheet (PDF).
How to Install
- Clean the joint so it is dry, sound and free of old caulk, soap scum and debris.
- Cut the nozzle at 45 degrees, puncture the inner foil seal and load the cartridge into a caulk gun.
- Fill the joint. Use foam backer rod first if it is deeper than 1/2 in.
- Tool or smooth the bead before it skins over.
- Keep water off for at least 12 hours and do not touch the bead for 24 hours.
- Remove uncured sealant with mineral spirits. Cut or scrape away cured sealant.
Not recommended for continuous underwater use or for brass, copper, zinc, iron or galvanized metal. Source: DAP 100% Silicone Kitchen & Bath technical data sheet (PDF).
Frequently Asked Questions
Can I paint silicone caulk?
No. Paint the surface first, then apply the sealant.
How soon can I use the shower?
After 12 hours. Leave the bead untouched for the full 24 hours to cure.
Can I use it outside?
This one is for interior use. Use the DAP 100% Silicone Window & Door sealant on exterior joints.
Which metals can it touch?
Avoid brass, copper and its alloys, zinc, iron and galvanized metal, which it can corrode.