DeWalt DCS590B 20V MAX XR 7-1/4 in. Circular Saw - Tool Only
特别订单 - 48小时内送达或取货
DeWalt 20V MAX XR 7-1/4 in. Circular Saw - Tool Only
The DeWalt DCS590B is a 20V MAX XR brushless circular saw with a full-size 7-1/4 in. blade, built to match the cutting depth of a corded saw without a cord. It runs up to 5,500 RPM with a 57 degree bevel capacity and stops at 45 and 22.5 degrees, cutting up to 2-9/16 in. deep at 90 degrees.
Bare tool only. No battery or charger is included. It runs on any DeWalt 20V MAX battery.
Features and Common Uses
- Brushless motor runs up to 5,500 RPM, matching a corded 7-1/4 in. saw's cutting depth
- 57 degree bevel capacity with stops at 45 and 22.5 degrees
- Cuts up to 2-9/16 in. deep at 90 degrees and 2 in. at 45 degrees
- Full-size 7-1/4 in. blade handles dimensional lumber in a single pass
Commonly used for:
- Framing and full-depth dimensional lumber cuts
- Deck and structural framing where a compact saw runs out of depth
- Bevel cuts for rafters and angled framing
Specifications
| Brand | DeWalt |
|---|---|
| Model Number | DCS590B |
| Series | 20V MAX XR |
| Blade Size | 7-1/4 in. |
| No-Load Speed | up to 5,500 RPM |
| Bevel Capacity | 57 degrees, stops at 45 and 22.5 |
| Max Cutting Depth at 90 | 2-9/16 in. |
| Max Cutting Depth at 45 | 2 in. |
| Arbor Size | 5/8 in. |
| Motor | Brushless |
| Weight | about 8.2 lb, bare tool |
| Battery | 20V MAX XR, sold separately |
Blade size, RPM, bevel capacity and cutting depth are DeWalt's published specifications for the DCS590 platform; weight is not listed on DeWalt's own product page and is carried from a secondary distributor spec table, flagged separately from the manufacturer-sourced figures above. Source: DeWalt DCS590B Product Page (dewalt.com).
Frequently Asked Questions
Does this come with a battery?
No. This is the bare tool (DCS590B). It runs on any DeWalt 20V MAX battery; battery and charger are sold separately.
How does this compare to the DCS391B?
This is the full-size 7-1/4 in. saw with a deeper cut (2-9/16 in. versus 2-1/4 in. at 90 degrees) and higher speed. The DCS391B is the smaller, lighter 6-1/2 in. saw.
What blade does it use?
A 7-1/4 in. blade with a 5/8 in. arbor.