自1964年以来，加拿大拥有并运营，引以为傲
Diablo 6-1/2" x 48-Tooth Track Saw Blade for Fine Finish and Plywood
*仅限线上定价
Diablo 6-1/2 in. x 48-Tooth Track Saw Blade
Diablo's 48-tooth track saw blade has a thick 1.8 mm (.07 in.) laser-cut kerf that keeps the blade rigid for straight cuts along a guide rail. Alternate top bevel (ATB) teeth give tracking control, clean cuts and minimal tear-out in plywood, melamine and veneered sheet goods. Diablo says the thick kerf suits saws with or without a riving knife.
It fits 6-1/2 in. track saws with a 20 mm arbor, and a bushing is included for 5/8 in. arbors. Diablo lists compatibility with 6-1/2 in. track saws from Bosch, DeWalt, Makita and Milwaukee (20 mm arbor) and Ryobi (5/8 in. arbor with the included bushing).
Track saws only. Diablo lists this blade for track saws, not handheld circular saws.
Features and Common Uses
- Thick laser-cut kerf (1.8 mm) gives the rigidity a track saw needs for straight, accurate cuts
- Alternate top bevel (ATB) teeth for tracking control, clean cuts and minimal tear-out
- TiCo Hi-Density carbide, made by Diablo, for ripping, cross-cutting and plunge cuts
- Perma-SHIELD non-stick coating protects against heat, gumming and corrosion
- Stabilizer vents and a laser-cut arbor reduce vibration and wobble
- More cuts per battery charge than standard blades in cordless track saws, by Diablo's rating
Commonly used for:
- Plywood, melamine and veneered panels
- Cabinet and trim work
- Sheet goods, large boards and bevel cuts along a guide rail
Specifications
| Brand | Diablo |
|---|---|
| Model | D0648TSF |
| Diameter | 6-1/2 in. |
| Teeth | 48 |
| Tooth design | Alternate top bevel (ATB) |
| Kerf | 1.8 mm (.07 in.) |
| Arbor | 20 mm, with bushing included for 5/8 in. |
| Maximum speed | 8,800 RPM |
| Carbide | TiCo Hi-Density |
| Coating | Perma-SHIELD non-stick |
| Cuts | Hardwoods, softwoods, veneered plywood, plywood, particle board, melamine, MDF |
| Country of origin | Italy |
| Pack quantity | 1 |
Specifications and compatible track saws are from Diablo's product page. Confirm your saw's blade diameter and arbor, and never run the blade above 8,800 RPM. Source: Diablo D0648TSF product page (diablotools.com).
Frequently Asked Questions
Will it fit my track saw?
It has a 20 mm arbor and includes a bushing for 5/8 in. arbors. Diablo lists 6-1/2 in. track saws from Bosch, DeWalt, Makita, Milwaukee and Ryobi. Check your saw's blade diameter and arbor first.
What does it cut?
Hardwoods, softwoods, veneered plywood, plywood, particle board, melamine and MDF.
Do I need a riving knife?
No. Diablo says the thick kerf suits saws with or without a riving knife.
Can I use it on a circular saw?
Diablo lists it for track saws. For a handheld circular saw, choose a blade Diablo lists for circular saws.