自1964年以来，加拿大拥有并运营，引以为傲
Galvanized A307 Threaded Rod 36 in. Long, 3/4 in. and 5/8 in. Diameter
*仅限线上定价
Galvanized A307 Threaded Rod, 36 in. Long
Galvanized A307 Grade A threaded rod in 36 in. lengths, sold in 3/4 in. and 5/8 in. diameters. Coarse UNC thread runs the full length of the rod, so it takes standard nuts and washers and can be cut to length with a hacksaw or grinder.
Common uses are hanger rods, anchor rods and light-duty tie rods. Rods in other lengths are also stocked. Ask us for the length you need.
Features and Common Uses
- Carbon steel threaded rod to ASTM A307 Grade A
- Galvanized finish for outdoor and damp locations
- Full-length coarse UNC thread, 36 in. long
Commonly used for:
- Hanger rods for light fixtures, ducts and mechanical supports
- Anchor and tie rods in framing and light construction
- Cut-to-length stock for custom fabrication
Specifications
| Material | Carbon steel |
|---|---|
| Specification | ASTM A307 Grade A |
| Finish | Galvanized |
| Diameter | 3/4 in. and 5/8 in. |
| Thread | Coarse UNC: 3/4-10 and 5/8-11 |
| Length | 36 in. |
| Tensile strength | 60,000 psi minimum |
Thread, length and grade match the A307 threaded rod listing published by Lawson Products (item 10008, 3/4-10 x 36 in.). Confirm the grade and finish on the bundle label before use in a load-bearing application. Source: Lawson Products threaded rod, item 10008.
How to Install
- Cut to length
- Thread the nut
- Tighten the assembly
Frequently Asked Questions
Can I cut this rod to length?
Yes. Use a hacksaw, cutoff wheel or grinder. Deburr the cut end and chase the threads with a die before use.
Do you stock other lengths?
Yes. This listing is the 36 in. length. Ask us for other lengths in the same diameters.
Is it rated for outdoor use?
Yes. Galvanized finish resists corrosion in damp and outdoor locations better than zinc plating. Confirm the coating against your exposure for critical applications.