James Hardie Architectural Panel Siding, Fine Sand Texture, Primed for Paint
特别订单 - 48小时内送达或取货
James Hardie Architectural Panel Siding, Fine Sand Texture, Primed for Paint
Hardie Architectural Panel Siding is James Hardie's flat, large-format fiber cement panel, milled 5/16 in. thick and primed for field paint. This is the Fine Sand texture, sold in 4 ft. wide panels at 8 ft., 10 ft. or 12 ft. lengths.
Primed for Paint only. None of the three Architectural Panel textures are available in a factory ColorPlus finish. Contact us to request a ColorPlus quote if you'd like a factory-finished color option.
Panels install over framing at 16 in. or 24 in. o.c. Vertical joints are caulked, battened or built to a code-compliant seam, and horizontal joints take Z-flashing, per James Hardie's ESR-1844 fastening schedule.
Features and Common Uses
- James Hardie's flat, large-format fiber cement vertical panel siding, milled 5/16 in. thick in the Fine Sand texture
- Noncombustible fiber cement (ASTM E136), Class A flame spread (ASTM E84), resists moisture damage and holds no appeal for pests like woodpeckers or termites
- Primed and ready for field paint in the color of your choice
- 4 ft. wide panels in 8, 10 or 12 ft. lengths, for fewer seams than lap siding on a given elevation
- Complies with ICC-ES ESR-1844 and current IBC/IRC code requirements
Commonly used for:
- Full elevations on modern and contemporary builds
- Accent walls, gables and feature panels paired with lap or shingle siding
- Commercial and multi-family exteriors where large-format panels speed install
Specifications
| Brand | James Hardie |
|---|---|
| Product Line | Hardie Architectural Panel Siding |
| Texture | Fine Sand |
| Material | Fiber cement, ASTM C1186 Grade II Type A |
| Thickness | 5/16 in. |
| Panel Width | 4 ft. (48 in.) |
| Panel Length | 8 ft., 10 ft. or 12 ft. |
| Finish | Primed for paint |
| Fire Rating | Noncombustible per ASTM E136, Class A flame spread per ASTM E84 |
| Minimum Stud Spacing | 16 in. o.c. (24 in. o.c. with the reduced fastener schedule) |
| Coverage, 4 ft. x 8 ft. panel | 32 sq. ft. |
| Coverage, 4 ft. x 10 ft. panel | 40 sq. ft. |
| Coverage, 4 ft. x 12 ft. panel | 48 sq. ft. |
| Panels per Lift, 4 ft. x 8 ft. and 4 ft. x 10 ft. | 50 |
| Panels per Lift, 4 ft. x 12 ft. | 40 |
| Warranty | 30-Year Non-Prorated Limited, Transferable Substrate Warranty |
Fastening capacity and code compliance for Hardie Architectural Panels are engineered per James Hardie's ICC-ES Evaluation Report ESR-1844, and the wind rating varies by fastener type, spacing, stud spacing and exposure category. Confirm the exact schedule for your building's framing and exposure before install. Source: James Hardie ICC-ES Evaluation Report ESR-1844 (PDF).
How to Install
- Maintain James Hardie's minimum clearance from grade and follow the flashing details at rooflines, decks and penetrations.
- Cut outdoors with a Hardie-approved blade and dust collection, or use a scoring shear for straight runs.
- Frame at 16 in. o.c. minimum, or 24 in. o.c. where the fastening schedule allows it.
- Fasten with 6d common nails at 4 in. o.c. or No. 8 screws at 6 in. o.c., with a minimum 3/8 in. edge distance and 2 in. corner clearance.
- Caulk, batten, or design vertical joints to a code-compliant seam, and flash horizontal joints with Z-flashing.
- Prime all field cuts and fastener heads, and caulk vertical joints before finish coating.
Full fastening schedule, wind ratings by exposure category, and joint treatment details: Source: James Hardie ICC-ES Evaluation Report ESR-1844 (PDF).
Frequently Asked Questions
What sizes does this panel come in?
4 ft. x 8 ft. (32 sq. ft.), 4 ft. x 10 ft. (40 sq. ft.) and 4 ft. x 12 ft. (48 sq. ft.), all 5/16 in. thick.
Can I get this in a factory color?
No. Hardie Architectural Panel ships primed for field paint only, across all three textures. Contact us if you'd like a ColorPlus quote on a different Hardie line.
How are the panel joints finished?
Vertical joints are caulked, covered with a batten, or built to a code-compliant seam per ICC-ES ESR-1844. Horizontal joints are flashed with Z-flashing, not caulked.
Is this panel available in Sea Grass texture too?
Yes, we also stock this panel in Sea Grass texture. James Hardie's third texture, Mounded Sand, isn't currently in our lineup - contact us if you'd like a quote.
What fasteners does this need?
6d common nails at 4 in. o.c. or No. 8 screws at 6 in. o.c., with a minimum 3/8 in. edge distance and 2 in. corner clearance. The exact wind rating depends on your exposure category and stud spacing; see ESR-1844.