自1964年以来，加拿大拥有并运营，引以为傲
5/16" x 1-1/2" Hem-Fir Stock Lath, 4 ft
*仅限线上定价
5/16" x 1-1/2" Hem-Fir Stock Lath, 4 ft
This is hem-fir stock lath, 5/16 in. thick by 1-1/2 in. wide and 4 ft long. The thin strips are used as spacers, stakes, backing and light framing where a low-cost strip does the job.
Lath is a thin strip, not a structural board. It is not rated for loads, and it is not rot resistant, so keep it dry and out of ground contact for anything that has to last.
Features and Common Uses
- Hem-fir, a light softwood that is easy to cut, nail and staple
- 5/16 in. x 1-1/2 in. thin strip in a 4 ft length
- Low-cost stock for jobs where appearance does not matter
- Not pressure treated, so it is for dry, above-ground use
Commonly used for:
- Spacers and shims between stacked material
- Survey stakes and marking
- Backing strips and light trim
- Lattice frames and craft projects
Specifications
| Product | 5/16 x 1-1/2 Hem-Fir Stock Lath, 4 ft |
|---|---|
| Species | Hem-fir |
| Thickness | 5/16 in. |
| Width | 1-1/2 in. |
| Length | 4 ft |
| Pressure treated | No |
Lath is cut thin, so thickness and width can vary slightly by piece. Confirm the size and the quantity per unit before you order if it matters for your project.
Frequently Asked Questions
What is stock lath?
Stock lath is a thin wood strip, here 5/16 in. by 1-1/2 in., sold in standard lengths for general use as stakes, spacers and backing.
What is hem-fir?
Hem-fir is a commercial species group made up of western hemlock and true firs. The wood is light and easy to work, and it is graded and sold together as one group.
Can I use it outside?
Only for short-term or covered use. It is not pressure treated or naturally rot resistant, so it will decay in wet or ground contact. Choose cedar lath for outdoor trellis work.