自1964年以来，加拿大拥有并运营，引以为傲
Innovative Shieldkote Standard Concrete Form Release Oil, 4 L and 20 L
*仅限线上定价
Shieldkote Standard Concrete Form Release Oil
Shieldkote Standard is a ready-to-use chemical release agent from Innovative Manufacturing of Delta, BC. It leaves a thin waterproof film on the form face so concrete strips cleanly instead of bonding to the form.
Use it on wood and untreated plywood, steel forms, seal-treated plywood and fibre tube forms. Do not use it on galvanized forms or store it in galvanized pails. Sold in 4 L and 20 L sizes.
Features and Common Uses
- Forms a waterproof film that stops concrete bonding to the form face
- Ready to use, with no dilution
- Works on wood, untreated and seal-treated plywood, steel and fibre tube forms
- Pale straw liquid; water beads on treated surfaces so you can see where it has been applied
- Meets Corps of Engineers CE 1401.01 and CW 03101 form coating references listed on the manufacturer bulletin
Commonly used for:
- Wall, footing and column forms
- Slab edge forms and steel pans
- Fibre tube column forms
Specifications
| Brand | Innovative Manufacturing |
|---|---|
| Product | Shieldkote Standard (Bulletin 3406) |
| Type | Chemical form release agent |
| Composition | Wood fat derivatives and additives in a hydrocarbon carrier |
| Appearance | Pale straw-coloured liquid |
| Specific gravity | 0.82 |
| Density | 0.82 kg/L (6.8 lb/US gal) |
| Viscosity | 5 to 6 cps |
| Coverage, wood and untreated plywood | 20 to 24 m²/L (800 to 1,000 sq. ft./US gal) |
| Coverage, steel, seal-treated plywood, fibre tube | 24 to 30 m²/L (1,000 to 1,200 sq. ft./US gal) |
| Sizes | 4 L, 20 L |
Figures are from the manufacturer's product bulletin. Coverage depends on form surface and porosity. Source: Innovative Manufacturing Shieldkote Standard Product Bulletin 3406 (PDF).
How to Apply
- Clean the form face of dust, loose concrete and standing water before coating.
- Stir before each use.
- Brush, roll or spray one even coat. A low-pressure sprayer is recommended. Avoid runs and puddles.
- On plywood edges, apply one to two heavy brush coats.
- Clean tools with mineral spirits and hands with waterless hand cleaner. Do not use petroleum distillates on skin.
Contains petroleum distillates. Wear eye protection, work in a ventilated area and keep away from open flame. Harmful or fatal if swallowed. Source: Innovative Manufacturing Shieldkote Standard Product Bulletin 3406 (PDF).
Frequently Asked Questions
How far does a litre go?
About 20 to 24 m² on wood and untreated plywood forms, and 24 to 30 m² on steel, seal-treated plywood and fibre tube forms.
Do I need to thin it?
No. The bulletin describes it as ready to use. Stir it before each use.
Can I use it on galvanized forms?
No. The manufacturer says not to use it on galvanized forms or store it in galvanized pails.
How should I apply it?
One thin, even coat by brush, roller or low-pressure sprayer. Avoid runs and puddles.