Lumber Lock Subfloor & Construction Adhesive 825mL, Case of 12
特别订单 - 48小时内送达或取货
Lumber Lock Subfloor & Construction Adhesive 825mL, Case of 12
Lumber Lock is a heavy-duty subfloor and construction adhesive that guns easily in the cold and resists running in the heat. It bonds subfloor sheathing to joists and stays flexible to help keep the floor quiet. This case holds 12 cartridges of 825 mL (28 oz).
Features and Common Uses
- Stays flexible to bridge framing irregularities and keep floors quiet
- Bonds to wet, frozen and pressure-treated lumber
- Easy to gun in cold weather; resists running in heat
- Freeze/thaw stable; not damaged by freezing
Commonly used for:
- Gluing plywood and OSB subfloor to joists
- Stairs, treads, risers and stringers
- Decks, fences, porches and patios
- Reducing joist hanger noise (add a small amount before setting the joist)
Specifications
| Brand | Lumber Lock |
|---|---|
| Manufacturer | Katabatic Manufacturing (KM Corp) |
| Product No. | E62 |
| Type | Synthetic polymer (mastic) subfloor and construction adhesive |
| Colour | Tan |
| Cartridge Size | 825 mL (28 oz) |
| Cartridges per Case | 12 |
| Application Temperature | -17°C to 49°C (0°F to 120°F) |
| Service Temperature | -34°C to 59°C (-30°F to 138°F) |
| Open Time | 20 minutes |
| Cure | 24-48 hours before heavy traffic |
| VOC | 399 g/L |
| Coverage per Cartridge | approx. 39 ft of 3/8 in. bead, 86 ft of 1/4 in. bead, 355 ft of 1/8 in. bead |
| Standards | CAN/CGSB-71.25M, CAN/CGSB-71.26M, APA AFG-01; Class 1/8 in., Type P/O per ASTM D3498-19 |
| Shelf Life | 18 months, unopened |
Specifications are from the manufacturer's technical data sheet. Source: Lumber Lock Technical Data Sheet V8.24 (PDF).
How to Install
- Precut lumber and prepare all materials first. Remove loose ice, snow, water, mud, sawdust and debris.
- Cut the tip on a slant for a 3/8 in. bead and puncture the inner seal.
- Run a continuous bead on one surface. Where sheathing ends meet on a joist, use a zig-zag bead under each panel.
- Press the surfaces together with a slight twist and complete bonding within 20 minutes.
- Apply adhesive for one sheet at a time, leave 1/8 in. expansion gaps at panel ends and edges, and nail or screw at all supports per local code.
Do not use on plastics, polystyrene or polyethylene foams, or to bond two non-porous materials. Clean tools with mineral spirits. Source: Lumber Lock Technical Data Sheet V8.24 (PDF).
Frequently Asked Questions
How many cartridges are in a case?
12 cartridges of 825 mL (28 oz).
Can I use it in cold weather?
Yes. It can be applied from -17°C (0°F) up to 49°C (120°F).
Does it work on wet or treated lumber?
Yes. It bonds to wet, frozen and pressure-treated lumber.
How long before the floor can take heavy traffic?
Allow 24-48 hours.