自1964年以来，加拿大拥有并运营，引以为傲
EAB Stay Sharp 7 in. x 1/8 in. Metal Cut-Off Wheel, Type 1 (2140112)
*仅限线上定价
EAB Stay Sharp 7 in. x 1/8 in. Metal Cut-Off Wheel, Type 1
A 7 in. x 1/8 in. Type 1 abrasive cut-off wheel from EAB's Stay Sharp Professional line, for cutting steel and sheet metal on a circular saw. The 5/8 in. arbor hole is reinforced with a metal flange for strength.
Rated 8,600 RPM. Use it only on a tool whose rated speed is at or below that figure, with the guard in place.
A Type 1 cut-off wheel is for straight cuts only. Do not grind with the face of the wheel.
Features and Common Uses
- 7 in. diameter, 1/8 in. thick, 5/8 in. arbor
- Type 1 flat profile
- Rated 8,600 RPM
- Reinforced arbor hole with a metal flange
- EAB Stay Sharp Professional grade
Commonly used for:
- Cutting steel and sheet metal
- Cutting ferrous and non-ferrous metals
Specifications
| Brand | EAB Stay Sharp |
|---|---|
| EAB item number | 2140112 |
| Diameter | 7 in. |
| Thickness | 1/8 in. |
| Arbor | 5/8 in. |
| Wheel type | Type 1 |
| Rated speed | 8,600 RPM |
| Tool | Circular saw |
| Materials | Ferrous and non-ferrous metal, sheet metal and steel |
Specifications are from EAB's product page for item 2140112. Griff item B14011 matches it by UPC. Always confirm the maximum RPM printed on the wheel against your tool's rated speed before use. Source: EAB Stay Sharp 2140112 product page.
Frequently Asked Questions
What tool does it fit?
A circular saw that takes a 7 in. wheel on a 5/8 in. arbor and runs at no more than 8,600 RPM.
Will it cut concrete or brick?
No. It is a metal wheel. For masonry use a masonry cut-off wheel, such as the EAB 7 in. x 1/8 in. masonry wheel.
Can I grind with it?
No. Type 1 cut-off wheels are thin and made for cutting with the edge only. For grinding use a 1/4 in. Type 27 depressed centre wheel.