自1964年以来，加拿大拥有并运营，引以为傲
EAB Stay Sharp 5 in. x 1/4 in. Depressed Centre Metal Grinding Wheel, Type 27 (2160082)
*仅限线上定价
EAB Stay Sharp 5 in. x 1/4 in. Depressed Centre Metal Grinding Wheel, Type 27
A 5 in. x 1/4 in. Type 27 depressed centre wheel from EAB's Stay Sharp Professional line, for grinding steel and other metals on an angle grinder. The 7/8 in. arbor hole is reinforced with a wide aluminum flange for strength.
Rated 12,200 RPM. Use it only on a tool whose rated speed is at or below that figure, with the guard in place.
Features and Common Uses
- 5 in. diameter, 1/4 in. thick, 7/8 in. arbor
- Type 27 depressed centre profile
- Rated 12,200 RPM
- Reinforced arbor hole with a wide aluminum flange
- EAB Stay Sharp Professional grade
Commonly used for:
- Grinding welds and steel
- Deburring and bevelling metal edges
Specifications
| Brand | EAB Stay Sharp |
|---|---|
| EAB item number | 2160082 |
| Diameter | 5 in. |
| Thickness | 1/4 in. |
| Arbor | 7/8 in. |
| Wheel type | Type 27 (depressed centre) |
| Rated speed | 12,200 RPM |
| Tool | Angle grinder |
| Materials | Ferrous and non-ferrous metal, sheet metal and steel |
Specifications are from EAB's product page for item 2160082. Griff item B16008 matches it by UPC. Always confirm the maximum RPM printed on the wheel against your tool's rated speed before use. Source: EAB Stay Sharp 2160082 product page.
Frequently Asked Questions
What tool does it fit?
An angle grinder that takes a 5 in. wheel on a 7/8 in. arbor and runs at no more than 12,200 RPM.
Will it cut concrete or brick?
No. It is a metal wheel. For masonry use a masonry cut-off wheel, such as the EAB 7 in. x 1/8 in. masonry wheel.