自1964年以来，加拿大拥有并运营，引以为傲
Simpson Strong-Tie LS30 Skewable L Angle, 3-3/8 in., 18-Gauge
*仅限线上定价
LS30 Skewable L Angle, 3-3/8 in.
The LS30 is a 3-3/8 in. reinforcing angle that bends in the field from 0 to 135 degrees, so it can tie members that meet at odd angles. It fastens with 10d common nails or #9 x 1-1/2 in. Strong-Drive SD connector screws.
Bend it one time only. Re-bending work-hardens the steel and voids the rating.
Features and Common Uses
- 18-gauge galvanized reinforcing angle, 3-3/8 in. long
- Field-skewable from 0 to 135 degrees
- Nail or screw fastening
Commonly used for:
- Blocking and joist-to-beam ties at angles
- Skewed rafter and joist connections
- Household repairs and DIY framing
Specifications
| Brand | Simpson Strong-Tie |
|---|---|
| Model | LS30 |
| Length (L) | 3-3/8 in. |
| Gauge | 18 ga. |
| Fasteners | 10d common nails or #9 x 1-1/2 in. Strong-Drive SD screws |
| Finish | Zinc galvanized, G90 |
Dimensions and fasteners are from Simpson's catalogue for the LS series. Loads vary by fastener and species; confirm them for your connection. Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, p. 313 (PDF).
How to Install
- Bend the angle to the joint angle one time only.
- Fill the holes with 10d common nails or #9 x 1-1/2 in. SD screws.
- Where a single LS makes the connection, block the joist against rotation.
Full installation notes and load tables: Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, p. 313 (PDF).
Frequently Asked Questions
Can I bend it back and forth?
No. Simpson allows one bend only.
Can I use it on a pressure-treated deck?
Not this finish. G90 galvanizing is for dry, interior framing. For preservative-treated lumber or exterior exposure, Simpson calls for ZMAX, hot-dip galvanized or stainless steel connectors and matching fasteners. Ask us about the ZMAX or stainless version.