自1964年以来，加拿大拥有并运营，引以为傲
Simpson Strong-Tie SSTB16 Anchor Bolt, 5/8 in. x 17-5/8 in.
*仅限线上定价
SSTB16 Anchor Bolt, 5/8 in. x 17-5/8 in.
The SSTB16 is a 5/8 in. x 17-5/8 in. cast-in-place anchor bolt that ties a holdown to the foundation. An offset angle gives more concrete cover and reduces side bursting, and an embedment line stamped on the bolt shows how deep to set it.
Nuts and washers are not included. Add standard nuts, couplers or washers as your holdown requires.
Features and Common Uses
- 5/8 in. x 17-5/8 in. anchor bolt, ASTM F1554 Grade 36
- Offset angle reduces side bursting and adds concrete cover
- Stamped embedment line and model ID on the head
- Rolled thread for higher tensile capacity
Commonly used for:
- Holdown anchorage at shear walls
- Monolithic and two-pour foundations
Specifications
| Brand | Simpson Strong-Tie |
|---|---|
| Model | SSTB16 |
| Diameter | 5/8 in. |
| Length | 17-5/8 in. |
| Material | ASTM F1554, Grade 36 |
| Finish | Uncoated (HDG by special order) |
| Included | Bolt only; nuts and washers not supplied |
Size and material are from Simpson's product data for the SSTB16. Anchorage capacity depends on concrete strength, edge distance and pour type; confirm it from the catalogue. Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, pp. 42-45 (PDF).
How to Install
- Hold the bolt in position at the holdown location before the pour.
- Set it to the stamped embedment line.
- After cure, install the holdown with standard nuts and washers.
Full installation notes and load tables: Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, pp. 42-45 (PDF).
Frequently Asked Questions
Are nuts included?
No. Simpson supplies the bolt only; add standard nuts, couplers or washers.
Two-pour foundations?
Yes. Simpson rates the SSTB for monolithic and two-pour concrete.