Simpson Strong-Tie Titen HD 5/8 in. x 6 in. Heavy-Duty Screw Anchor, Mechanically Galvanized
*仅限线上定价
Titen HD 5/8 in. x 6 in. Screw Anchor, Mechanically Galvanized
The Titen HD is Simpson's heavy-duty screw anchor for concrete and masonry. This 5/8 in. x 6 in. hex-head version is mechanically galvanized for more corrosion protection than the standard zinc-plated Titen HD. Hole size equals anchor size: drill a 5/8 in. hole with a standard ANSI bit.
Use each anchor once. Simpson warns that reinstalling a Titen HD wears the threads and reduces load capacity.
Features and Common Uses
- 5/8 in. x 6 in. hex head, 5-1/2 in. of thread
- Mechanically galvanized carbon steel
- Serrated tip cuts in and lowers install torque
- Hole size equals anchor size
Commonly used for:
- Ledgers, sill plates and holdowns to concrete
- Post bases and equipment to slabs
- Structural anchorage into grout-filled block
Specifications
| Brand | Simpson Strong-Tie |
|---|---|
| Model | THDB62600HMG |
| Diameter | 5/8 in. |
| Length | 6 in. |
| Thread length | 5-1/2 in. |
| Drill bit | 5/8 in. |
| Fixture hole | 3/4 in. to 13/16 in. |
| Wrench size | 15/16 in. |
| Finish | Mechanically galvanized |
Sizes are from Simpson's product data for the THDB62600HMG. Loads depend on embedment, concrete strength and edge distance; confirm them from the anchoring catalogue. Source: Simpson Strong-Tie Anchoring and Fastening Systems for Concrete and Masonry Catalog C-A-2023, pp. 62-79 (PDF).
How to Install
- Drill a 5/8 in. hole to embedment depth plus the overdrill Simpson specifies.
- Blow the hole clean with compressed air (overhead holes excepted).
- Drive the anchor through the fixture until snug. Never reuse it.
Full installation notes and load tables: Source: Simpson Strong-Tie Anchoring and Fastening Systems for Concrete and Masonry Catalog C-A-2023, pp. 62-79 (PDF).
Frequently Asked Questions
Can I reuse it?
No. Simpson says use a Titen HD one time only.
What bit?
A standard 5/8 in. ANSI carbide bit; hole size equals anchor size.