自1964年以来，加拿大拥有并运营，引以为傲
Simpson Strong-Tie TP39 Tie Plate, 3-1/8 in. x 9 in., 20-Gauge
*仅限线上定价
TP39 Tie Plate, 3-1/8 in. x 9 in.
The TP39 is a flat 20-gauge tie plate, 3-1/8 in. x 9 in., for splicing and tying wood members face to face. The staggered hole pattern takes up to (41) 0.131 in. nails without splitting the wood.
Hand-nailed only; this is not a toothed truss plate.
Features and Common Uses
- 20-gauge galvanized flat plate, 3-1/8 in. x 9 in.
- Staggered nail pattern resists splitting
- Nails or #9 Strong-Drive SD screws
Commonly used for:
- Splicing top plates and blocking
- Tying rafters and joists at laps
- Repairs to split framing
Specifications
| Brand | Simpson Strong-Tie |
|---|---|
| Model | TP39 |
| Width (W) | 3-1/8 in. |
| Length (L) | 9 in. |
| Gauge | 20 ga. |
| Fasteners | (41) 0.131 in. x 2-1/2 in. or 0.131 in. x 1-1/2 in. nails, or #9 Strong-Drive SD screws |
| Finish | Zinc galvanized, G90 |
Dimensions and fastener pattern are from Simpson's catalogue for the TP series. Allowable loads depend on fastener and species; confirm them for your connection. Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, p. 341 (PDF).
How to Install
- Centre the plate over the joint so each member gets half the holes.
- Fill the holes with the specified nails or screws.
Full installation notes and load tables: Source: Simpson Strong-Tie Wood Construction Connectors Catalog C-C-2026, p. 341 (PDF).
Frequently Asked Questions
How many nails?
Up to (41) 0.131 in. nails, or #9 Strong-Drive SD connector screws.
Can I use it on a pressure-treated deck?
Not this finish. G90 galvanizing is for dry, interior framing. For preservative-treated lumber or exterior exposure, Simpson calls for ZMAX, hot-dip galvanized or stainless steel connectors and matching fasteners. Ask us about the ZMAX or stainless version.