TimberTech Prime+ Decking 5/4x6
Special Order - 48 Hours for Delivery or Pick Up
TimberTech Prime+ Composite Decking 5/4x6
Prime+ boards use a vivid colour blend across a textured grain, giving the surface a dimensional look closer to milled lumber than a flat composite tone. The core is a wood fibre and recycled polymer blend, wrapped on all four sides in a wood fibre free cap, so nothing needs sanding, staining or sealing once it is down.
It comes in two profiles. Grooved boards have a scalloped underside and pair with the EDGELoc hidden fastener, so no screw heads show on the field of the deck. They come in 12, 16 and 20 ft. Square shouldered boards have square edges and screw through the face, typically with TOPLoc colour matched screws. They come in 20 ft. Use grooved across the main deck and square shouldered for the outside boards and picture framing.
Specifications
- Grooved: about 2.06 lb per linear foot. 24.9 lb at 12 ft, 33.0 lb at 16 ft, 41.2 lb at 20 ft.
- Square shouldered: about 2.16 lb per linear foot. 43.2 lb at 20 ft.
- Actual board size 5.36 in. x 0.94 in.
- Material: recycled polymer and reclaimed wood fibre core, wrapped on all four sides in a wood fibre free cap
- Cap: full cap that resists fading, staining and weathering
- Surface: textured grain with vivid colour blending, a scalloped underside on the grooved profile
- Warranty: 25 year product, fade and stain limited warranty
Why choose Prime+
- Vivid colour blending and textured grain for a dimensional, milled lumber look
- Scalloped grooved profile pairs with the EDGELoc hidden fastener, so the main deck shows no screws
- Full 16 in. on-centre joist span, so framing costs less than solid lumber decking
- Will not splinter, crack, cup or peel
- Made from about 85 percent recycled material, including plastic bags and milk jugs
- Fade and stain resistant cap with UV protection
Performance and warranty
- Capping: full cap resists UV, oils and household spills
- Fade and stain: cap holds colour through the 25 year warranty term
- Moisture: wood fibre core is fully wrapped, resists mould, mildew and rot
- Will not splinter, crack, cup or peel
- Warranty: 25 year product, fade and stain limited warranty
- Sustainability: made from about 85 percent recycled material
Dimensions and system
- Deck boards: 5.36 in. x 0.94 in. actual. Grooved 12, 16 and 20 ft. Square shouldered 20 ft.
- Matching fascia: 0.58 in. x 11.95 in., 12 ft
- Matching riser: 0.58 in. x 7.25 in., 12 ft
- Fasteners: EDGELoc hidden fastener for grooved boards, TOPLoc colour matched screws for square shouldered. Cortex is not compatible with the scalloped grooved profile.
- Colours: Sea Salt Gray, Coconut Husk, Dark Cocoa
- Pricing: per linear foot, sold as full boards
Care
An occasional scrub and rinse is enough for the whole life of the deck. Use TimberTech DeckCleaner or mild soap and water. Never sand, stain or seal it.
How to install
Grooved boards are scalloped underneath and built for the EDGELoc hidden fastener, a collated clip strip with preset screws that also sets a consistent gap between boards. Cortex plugs are not compatible with this profile, so do not substitute.
Square shouldered boards are screwed through the face, typically with TOPLoc colour matched screws, at the outer edge of the deck or in picture framing.
Joist spacing, gapping and fastener spacing change with the application, so follow TimberTech's current installation guide for EDGE composite decking. That guide governs if you ever need to make a warranty claim.
Questions
Is square shouldered available in 12 or 16 ft?
No. Square shouldered Prime+ is stocked in 20 ft only. Grooved covers 12, 16 and 20 ft.
Can I use Cortex on the grooved boards?
No. TimberTech does not consider Cortex compatible with the Prime+ scalloped profile. Use the EDGELoc hidden fastener instead.
Does it need staining or sealing?
No. Wash it occasionally with soap and water or TimberTech DeckCleaner.
How wide can I space my joists?
TimberTech rates the Prime+ scalloped profile for a full 16 in. on-centre span.
Can I use it for framing?
No. These are surface boards and still need a code compliant frame underneath.
What trim matches?
TimberTech Prime+ fascia and riser in the same three colours. They are listed together as a separate product.