Hand Tools

Cushioned, rubber-grip handle Acetone resistant Ultra-Sharp Black Snap Blade Stainless-steel support channel Tool-free blade change

Features half-barrel support. Thrust ratio is 14:1. Blue color.

Estwing 22 oz. Milled Face Framing Hammer Estwing's framing hammer is forged from one solid piece of American steel, head and handle together, so...

TerraTuff - 18mm Snap Off Blades (50 Pack) - 04TTCB1850 These are TerraTuff's 18mm snap-off replacement blades, sized for any standard 18mm snap...

ClipDRIVE Stand-Up Deck Clip Fastening Tool ClipDRIVE is a drill attachment that installs CAMO's Universal Deck Clips, WedgeClip, WedgeMetal, Ed...

Stanley 9-Piece Hex Key Set, Imperial Every size folds into one body, so nothing goes missing in a drawer and you are not hunting for the 4 mm a...

Irwin Vise-Grip Groove Joint V-Jaw Pliers The V shape in the jaws is what makes these hold round work. A pipe or a round nut seats into the V an...

Irwin Vise-Grip Slip Joint Pliers The pivot moves between two positions, so one plier covers a small jaw opening and a wider one. Serrated flat ...

Irwin Vise-Grip Long Nose Pliers with Wire Cutter Tapered nose that reaches into a box or a recess, with serrated jaws for gripping and bending ...

Irwin Vise-Grip GrooveLock V-Jaw Pliers Press and slide button sets the jaw instead of lifting and shuffling the pivot, so the adjustment happen...

Master Lock No. 3 Laminated Steel Padlock The Master Lock No. 3 is the laminated steel padlock most people picture when they think of a padlock....

Master Lock No. 5 Laminated Steel Padlock The No. 5 is the 2 in. version of Master Lock's laminated steel padlock, and the step up in size bring...

GUARD 1-1/4 in. Solid Brass Padlock, Model 833 Solid brass body at 1-1/4 in. from GUARD's 800 series, keyed alike so one key opens every lock in...

Can be used wet or dry on a wide variety of surfaces and materials. Solvent Free. Used in any application where a hard, flat sander shape is prefer...

Can be used wet or dry on a wide variety of surfaces and materials. Solvent Free. Used in any application where a hard, flat sander shape is prefer...

4lb Wood Splitting Wedge - Truper TRU33040 Truper's Super Splitter is a 4 lb. drop-forged steel wedge for hand-splitting firewood rounds. Set it ...

Blackline - Red Permanent Marking Chalk - (Select Size) Blackline's permanent red chalk uses the same wind- and water-resistant formula as the b...

Blackline - Black Permanent Marking Chalk - (Select Size) Blackline's permanent black chalk is formulated to infuse into porous surfaces like woo...

STANLEY - Razor Scraper Blade with 5 Blades - 28-500 Stanley's 28-500 is a 95mm razor scraper for lifting dried paint, glue, putty and adhesive o...

Stanley - 6" Adjustable Steel Wrench - 87-367 Stanley's 87-367 is a 6 in. adjustable wrench forged from chrome vanadium steel, with a knurled adj...

Stanley - 26' FATMAX Tape Measure - 33-726 Stanley's FATMAX 33-726 pairs a 26 ft. tape with a 1-1/4 in. wide blade, protected by Stanley's BladeA...

Simpson Strong-Tie ADT813S Manual Dispensing Tool for 12.5 oz. AT-XP Acrylic Adhesive Cartridges The ADT813S is the manual gun Simpson Strong-Tie...

Picquic - Sixpac Plus Multi-Bit Screwdriver - 04PQ The Sixpac Plus is Picquic's compact multi-bit screwdriver: a 6 in. handle that stores six dou...

GUARD 2 in. Double Locking Solid Brass Padlock, KA1 The 2 in. solid brass body on the KA1 keyed-alike number. Ordering to a named keying group i...

GUARD 2 in. Double Locking Solid Brass Padlock, Keyed Alike The 2 in. body is the largest in GUARD's solid brass range, with a correspondingly t...

Irwin Vise-Grip 7WR Curved Jaw Locking Pliers, 7 in. The curved jaw grips a nut or bolt head at four points instead of two, which is what lets t...

Irwin Vise-Grip 8R Locking Sheet Metal Tool, 8 in. Wide flat jaws, 3-1/8 in. across, that clamp along a line rather than at a point. That is wha...

Irwin Vise-Grip 7R Straight Jaw Locking Pliers, 7 in. Straight jaws meet face to face, so they hold flat stock, square bar and sheet across the ...

Irwin Vise-Grip 7CR Curved Jaw Locking Pliers, 7 in. Curved jaws put pressure on four points of a nut or a bolt head, which is what lets these t...

Irwin Vise-Grip 5CR Curved Jaw Locking Pliers, 5 in. The small curved jaw locking plier, 5 in. long. Same four-point curved grip as the 7CR in a...

Irwin Vise-Grip Original Long Nose Locking Pliers A long straight nose that reaches into a recess an ordinary locking plier cannot enter, and lo...

Irwin Vise-Grip 9 in. Iron Worker's Pliers Built for tying rebar. The jaws are machined with cross-hatched teeth so they hold tie wire while it ...

Irwin Vise-Grip 10-1/4 in. Fencing Pliers The one tool a fencing job needs in a pocket. It hammers staples, pulls them, grips and cuts wire, and...

Irwin Vise-Grip 8 in. Cable Cutting Pliers Curved shearing jaws that close around a cable and cut it through rather than crushing it flat. That ...

Irwin Vise-Grip 8 in. Multi Tool Wire Stripper, Cutter and Crimper Three jobs in one plier. Stripping notches sized to common wire gauges, a cut...

Irwin Vise-Grip Diagonal Cutting Pliers Angled jaws that cut close in to a surface and get at wire in a crowded box. Two sizes: the 6 in. for li...

Product Overview The IRWIN® VISE-GRIP® Lineman's Pliers are durably constructed from nickel chromium steel. They have ProTouch grips for comfort an...

Irwin 3 in. Aluminum Line Level Hangs on a taut string line and tells you whether the line is level, which is how you set a course of block, a f...

Irwin 3 in. Line Level, High-Impact ABS Hangs on a taut string line and tells you whether the line is level, over a span no spirit level will co...

TerraTuff - 1-1/4" x 25' Wideblade Tape Measure - 04TT11425S TerraTuff's wideblade tape measure runs a 1-1/4 in. blade out to 25 ft., the wide-bo...

Garant - 12" Claw Molding Puller - 04GCMP12 The Garant GCMP12 is a 12 in. forged steel molding puller built to lift trim, baseboard and small mol...

24" x 16" Heavy Duty Aluminum Carpenter Square - T58232 A 24 in. by 16 in. carpenter's square in aluminum, used to lay out square cuts, check co...

Heavy Duty Sledge Hammer with Fiberglass Handle This is Truper's forged-steel sledge hammer on a fiberglass handle with a rubber over-grip, stock...

OX Pro - Basic Colour and Graphite Carbon Marking Pencil Lead Refill (10 Pack) - 04X01831 This is the assorted-colour lead refill for the OX Too...

OX Pro - Carbon Marking Pencil Lead Refill (10 Pack) - 04X01832 This is the graphite lead refill for the OX Tools Tuff Carbon marking pencil - 10...

OX Pro Tuff Carbon Marking Pencil Value Pack The OX Pro Tuff Carbon marking pencil value pack is a complete kit: a square, anti-roll pencil body ...

OX Pro - 1" x 12" Cold Chisel - 04X33455 A 1 in. x 12 in. cold chisel from OX Tools' Pro line, sized for cutting and shaping metal stock and bre...

OX Pro - 3" x 11" Floor Chisel - 04X33454 A 3 in. x 11 in. floor chisel from OX Tools' Pro line. The wide, flat blade is built to get under floo...