Bolts Nuts and Washers

Galvanized Flat Metal Washers Sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"

Galvanized Metal Hex Nuts Sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"  

10' Metal Threaded Redi Rod. Zinc Plated A307

1/2" Hot Dipped Galvanized Hex Thru Bolts Lengths Available: 2", 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 5-1/2", 10", 12" Use 3/4" Hex Nut Driver Bit G...

Metal Carbon Steel Square Plate Washers Hole Sizes Available: 5/8", 3/4", 7/8" Plate Thickness: 1/4"

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for hi...

Zinc Plated Metal Flat Washers Sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for hi...

3/4" x 12' High Tensile B-12 Threaded Coil Rod The 3/4 in. x 12 ft. B12 Coil Rod is a continuous threaded rod in high-strength cold-rolled steel,...

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for hi...

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for hi...

10' Metal Threaded Redi Rod. Galvanized A307

Zinc Plated Metal Hex Nuts Sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"  

3/8" Hot Dipped Galvanized Lag Screw Bolts Lengths Available: 1-1/2", 2", 2-1/2", 3", 3-1/2", 5", 6", 8" Use 9/16" Hex Nut Driver Bit

Our 1/2" x 6" Anchor Bolt Pigtail with nut and washer is designed to securely attach plate members to concrete or masonry foundations. They can als...

The 3/4" B25 Heavy Coil Nut is a high-strength hex nut specifically designed for use with B12 coil rods in heavy concrete forming and precast appli...

Zinc Nailon Pin Bolt anchors are low-cost, easy-to-install anchors for applications under static loads. 1/4" Diameter Mushroom Head Carbon Steel S...

Galvanized Lock Metal Washers Sizes: 1/4", 3/8", 1/2", 5/8", 3/4"

Our 3/4" x 10" Anchor Bolt L-End with nut and washer is designed to securely attach plate members to concrete or masonry foundations. They can also...

Product Details A high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low in...

The Crimp Drive anchor is an easy-to-install expansion anchor for use in concrete and grout-filled block. 1/4" Diameter Mushroom Head Zinc Plated...

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for hi...

Zinc Plated Metal Flat Fender Washers Sizes: 1/4", 3/8", 1/2"

Galvanized Metal Timber Washers Sizes: 5/8", 3/4"

Hot dipped galvanized Grade 2 carriage bolts in 1/2" diameter, available in a range of lengths. A smooth domed head sits above a square neck that p...

Titen HD 5/8 in. x 6 in. Screw Anchor, Mechanically Galvanized The Titen HD is Simpson's heavy-duty screw anchor for concrete and masonry. This 5...

Simpson Strong-Tie Titen Turbo 1/4" Hex-Head Concrete & Masonry Screw, Blue (100 per Box) The Titen Turbo is Simpson Strong-Tie’s blue screw ...

3/4" x 8" Anchor Bolt L-End This is a 3/4 in. diameter x 8 in. L-shaped (bent) anchor bolt, used to embed into wet concrete or set into a drille...

Product Details The patented Outdoor Accents hex-head washer and structural wood screw combination provides the decorative appearance of a bolte...

The 5" x 5" x 3/4" Square Plate Washer is an extra-heavy-duty bearing plate designed to provide an expansive surface area for superior load distrib...

The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. As the anchor is driven in,...

Zinc Plated Metal Coupling Hex Nuts Sizes: 3/8", 1/2", 5/8", 3/4", 7/8"  

Zinc Plated Metal Flat Washers Sizes: 1/2", 5/8", 3/4"

5/8" Hot Dipped Galvanized Hex Thru Bolts Lengths Available: 2", 3-1/2", 4", 5", 5-1/2", 8", 12" Use 15/16" Hex Nut Driver Bit Grade A307

3/8" Hot Dipped Galvanized Hex Thru Bolts Lengths Available: 1-1/2", 2", 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 6", 7" Use 9/16" Hex Nut Driver Bit Gr...

3/4" Hot Dipped Galvanized Lag Screw Bolts Lengths Available: 4", 5", 6", 7", 8", 10", 12"

1/2" Hot Dipped Galvanized Lag Screw Bolts Lengths Available: 2", 2-1/2", 5", 6", 7", 8", 10", 12" Use 3/4" Hex Nut Driver Bit

1/4" Hot Dipped Galvanized Lag Screw Bolts Lengths Available: 1", 1-1/2", 3", 3-1/2", 4", 5", 6" Use 7/16" Hex Nut Driver Bit

Anchor Bolt, 3/4 in. x 12 in., L-End A 3/4 in. diameter by 12 in. long anchor bolt with an L-shaped end that sets into poured concrete. The threa...

Roofers World Harness Mount Roof Ridge Anchor RT-HMA The Roofers World RT-HMA is a temporary ridge anchor that attaches one worker, wearing a fal...

Simpson Strong-Tie Wedge-All 3/4 in. x 6-1/4 in. Wedge Anchor Simpson Strong-Tie Wedge-All expansion anchor, 3/4 in. diameter and 6-1/4 in. long ...

7/8 in. Coupling Nut A 7/8 in. coupling nut for joining threaded rod end to end. Specifications Product Specifications Type Coupling nut Th...

Plate Washers Heavy steel plate washers that spread bolt load over a wider area on wood framing. Two sizes. Specifications Product Specificatio...

1/2 in. Plated Wing Nut A plated steel wing nut for 1/2 in. threaded fasteners that need to be tightened and loosened by hand without tools. Spe...

5/16 in. Plated Coupling Nut A plated steel coupling nut for joining two 5/16 in. threaded rods or studs end to end. Specifications Product Spe...

5/16 in. x 5 in. Zinc-Plated Eye Bolt A zinc-plated steel eye bolt, 5/16 in. diameter and 5 in. long, for anchoring cable, rope or chain to wood ...