Bolts Nuts and Washers

Nylon Lock Nuts, Coarse Thread Nylon-insert lock nuts for coarse-thread bolts. The nylon collar grips the thread so the nut stays put under vibra...

5/16 in. Plated Coupling Nut A plated steel coupling nut for joining two 5/16 in. threaded rods or studs end to end. Specifications Product Spe...

5/16 in. x 5 in. Zinc-Plated Eye Bolt A zinc-plated steel eye bolt, 5/16 in. diameter and 5 in. long, for anchoring cable, rope or chain to wood ...

Makita 251644-1 Hex Flange Head Bolt, M8 x 20, for Circular Saws Genuine Makita replacement part 251644-1, an M8 x 20 hex flange head bolt with r...

Richelieu Plastic Wall Anchors, Blister Pack Richelieu plastic anchors are easy to install and can be used with most types of screws, in wall or ...

SnapSkru #8 Self-Drilling Drywall Anchors with Screws, 10 Pack SnapSkru is a self-drilling plastic dowel for drywall, suited to most #6 to #10 sc...

Galvanized Carriage Bolt, 3/8-16 x 2 in. This is a 3/8-16 x 2 in. hot dip galvanized steel carriage bolt with a smooth domed head, sold each. Fe...

Galvanized Round Head Carriage Bolt, 3/4-10 x 8 in. This is a 3/4-10 x 8 in. galvanized steel carriage bolt with a round head, sold each. Featur...

Simpson Strong-Tie Titen Turbo 1/4" x 3-1/4" Flat Head, 100-Pack Titen Turbo TNT25314TF is a 1/4 in. x 3-1/4 in. 6-lobe flat head screw for concr...

Galvanized A307 Threaded Rod, 36 in. Long Galvanized A307 Grade A threaded rod in 36 in. lengths, sold in 3/4 in. and 5/8 in. diameters. Coarse U...

Zinc-Plated A307 Threaded Rod, 36 in. Long Zinc-plated A307 Grade A threaded rod in 36 in. lengths, stocked in five diameters from 1/4 in. to 7/8...

Anchor Bolt, 5/8 in. A 5/8 in. diameter anchor bolt for fastening wood framing and hardware to concrete, in 6 in., 8 in. pigtail and 10 in. leng...

Anchor Bolt, 5/8 in. x 10 in., L-End An anchor bolt, 5/8 in. in diameter and 10 in. long, with a bent L-end. The bent end is cast into wet concre...

Quikrete Anchoring Cement Pail QUIKRETE Anchoring Cement is a rapid-setting cement that expands as it hardens. You just add water, and it sets in...

HIT-RE 500 V3 is a Hilti injectable epoxy mortar for heavy-duty anchoring and post-installed rebar connections in cracked and uncracked concrete. I...

HIT-HY 200-A V3 is a Hilti injectable adhesive anchor in a 330 mL (11.16 fl oz) foil pack, approved for hammer-drilled, hollow-drilled and diamond-...

 Galvanized Coupling Hex Nuts Size:  3/4"

Hot dipped galvanized Grade 2 carriage bolts in 5/8" diameter, available in a range of lengths. A smooth domed head sits above a square neck that p...

Hot dipped galvanized Grade 2 carriage bolts in 3/8" diameter, available in a range of lengths. A smooth domed head sits above a square neck that p...

Hot dipped galvanized Grade 2 carriage bolts in 3/4" diameter, available in a range of lengths. A smooth domed head sits above a square neck that p...

Hot dipped galvanized Grade 2 carriage bolts in 1/4" diameter, available in a range of lengths. A smooth domed head sits above a square neck that p...

Titen Turbo 1/4 in. x 2-1/4 in. Flat-Head Concrete Screw Titen Turbo is Simpson's concrete and masonry screw anchor. This is the 1/4 in. x 2-1/4 ...

SSTB16 Anchor Bolt, 5/8 in. x 17-5/8 in. The SSTB16 is a 5/8 in. x 17-5/8 in. cast-in-place anchor bolt that ties a holdown to the foundation. An...

KingCord 3/8 in. x 50 ft. Nylon Double Braid Anchor Line A double braid nylon anchor line with the eye already spliced and a 3/8 in. stainless s...

King Chain Galvanized Screw Pin Anchor Shackle Anchor shackles are the standard way to join a chain, cable or rope to a fitting. The bow shape g...

Hilti HDM 500 Manual Anchor Adhesive Dispenser The Hilti HDM 500 is a manual, ratcheting dispenser for injecting Hilti HIT adhesive anchor mortar...

Product Details The WSWH-AB high-strength wood shearwall anchor bolt is replacing the WSW anchor bolt. WSWH® accessories are compatible only wit...

Product Details The WSWH-RT high-strength wood shearwall anchor bolt templates are replacing the WSW anchor bolt templates. WSWH® accessories ar...

Onward 4 in. Zinc Barrel Bolt The simplest way to hold a gate or door shut: a sliding bar in a barrel that drops into a keeper on the frame. Not...

Onward 6 in. Ring Bolt with Nut Threaded shank with a ring formed at one end, fitted through a hole and secured with a nut on the far side. Beca...

Onward 6 in. Galvanized Barrel Bolt The simplest way to hold a gate or door shut: a sliding bar in a barrel that drops into a keeper on the fram...

Onward 12 in. Cane Bolt A cane bolt is the long drop bolt used on the inactive leaf of a double gate. It shoots down into a socket in the ground...

3/4" Hot Dipped Galvanized Hex Thru Bolts Lengths Available: 3", 3-1/2", 4-1/2", 5", 6", 7", 10" Grade A307

5/8" Hot Dipped Galvanized Lag Screw Bolts Lengths Available: 3", 3-1/2", 4", 4-1/2", 5", 6", 8", 10" Use 15/16" Hex Nut Driver Bit

Our 1/2" x 8" Anchor Bolt Pigtail with nut and washer is designed to securely attach plate members to concrete or masonry foundations. They can als...