Canadian Owned & Operated Since 1964
FastCap 2P-10 Solo Adhesive Kit, Thick CA Glue 2.25 oz with 12 oz Activator
*Online Pricing Only
FastCap 2P-10 Solo Adhesive Kit, Thick Glue and Activator
The 2P-10 Solo Adhesive Kit pairs FastCap's thick cyanoacrylate (CA) glue with an aerosol activator. Spray the activator on one surface, apply the glue to the other and press the parts together: the joint bonds in about 10 seconds and cures in about 30, so cabinet and millwork joints go together without clamps.
The kit contains one 2.25 oz (64 g) bottle of 2P-10 Solo Thick glue and one 12 oz (340 g) can of 2P-10 Solo Activator. The thick formula fills gaps and suits porous surfaces such as particleboard.
Test the activator first. It can discolor PVC siding, tan granite colors and some wood finishes. Test on a scrap or hidden area before use.
Features and Common Uses
- Thick cyanoacrylate formula that fills small gaps and grips porous material
- Activator spray sets the glue in about 10 seconds, with a full cure in about 30
- Bonds hard cabinetry joints without clamping
- Two-part kit: 2.25 oz thick glue plus 12 oz aerosol activator
- Final strength can take up to 5 days to develop fully
Commonly used for:
- Cabinet face frames and carcass joints
- Edge banding, trim and millwork
- Particleboard, MDF and other porous panel joints
- Jigs, templates and shop fixtures
Specifications
| Brand | FastCap |
|---|---|
| Product Line | 2P-10 Solo |
| Kit Contents | 1 x 2P-10 Solo Thick glue, 2.25 oz (64 g); 1 x 2P-10 Solo Activator aerosol, 12 oz (340 g) |
| Glue Type | Ethyl cyanoacrylate, thick viscosity |
| Glue Specific Gravity | 1.1 |
| Bond Time | About 10 seconds |
| Cure Time | About 30 seconds |
| Glue Storage | Store below 75 °F (24 °C) |
| Activator Storage | Do not store above 120 °F (48 °C) |
| Activator Hazard | Extremely flammable aerosol, contents under pressure |
Safety data sheet for the 2P-10 Aerosol Activator (FastCap, January 2014): Source: 2P-10 Aerosol Activator safety data sheet (PDF).
Safety data sheet for the 2P-10 Glue Cyanoacrylate Adhesive (FastCap, June 2014): Source: 2P-10 Glue safety data sheet (PDF).
Kit contents and use notes: Source: Richelieu 2P-10 Solo Adhesive Kit, SKU 916495.
How to Use
- Put on nitrile or polyethylene gloves and safety glasses, and work with good ventilation. Keep the activator away from sparks, heat and flame.
- Test the activator on a scrap or hidden area first, since it can discolor PVC siding, tan granite colors and some wood finishes.
- Spray the activator on one surface and apply the thick glue to the other.
- Press the parts together and hold for about 10 seconds. The glue cures in about 30 seconds.
- Before finishing, wipe the surface with denatured alcohol or a similar prep solvent to remove activator residue.
Handling, first aid and storage details: Source: 2P-10 Glue safety data sheet (PDF).
Frequently Asked Questions
What comes in the kit?
One 2.25 oz (64 g) bottle of 2P-10 Solo Thick glue and one 12 oz (340 g) can of 2P-10 Solo Activator.
Do I need clamps?
Usually not. The activated glue bonds in about 10 seconds and cures in about 30, so most joints only need to be held in place briefly.
Will the activator damage my material?
It can discolor PVC siding, tan granite colors and some wood finishes. Test on a scrap or hidden area first. Final results can take up to 5 days to show.
How do I remove activator residue?
Wipe the surface with denatured alcohol or a similar prep solvent before applying a finish.
Can I use cotton gloves or rags?
No. The glue's safety data sheet says not to use cotton. Use nitrile or polyethylene gloves and aprons.
Is there any shipping restriction?
The activator is a flammable aerosol, so carriers may restrict it, particularly by air. Contact us if you need it shipped.