24" x 16" Heavy Duty Aluminum Carpenter Square - T58232
*Online Pricing Only
24" x 16" Heavy Duty Aluminum Carpenter Square - T58232
A 24 in. by 16 in. carpenter's square in aluminum, used to lay out square cuts, check corners for 90 degrees, and mark rafter and stair angles. Aluminum runs lighter than a steel square of the same size and doesn't heat up sitting in the sun on a roof deck.
Features and Common Uses
- Aluminum body, lighter than an equivalent steel framing square
- 24 in. and 16 in. legs for laying out large angles and checking square
- Graduated markings for quick measurement without a separate tape
Commonly used for:
- Squaring up framing lumber and sheet stock before cutting
- Marking rafter cuts and stair stringers
- Checking that a corner, jamb or cabinet carcass is square
Specifications
| Material | Aluminum |
|---|---|
| Long Leg (Body) | 24 in. |
| Short Leg (Tongue) | 16 in. |
| Weight | About 0.94 lb |
No manufacturer or brand is printed on this item, and a spec sheet could not be located for item number T58232. Leg lengths and material are taken from the product packaging; a comparably sized 16 in. x 24 in. aluminum carpenter square from a name-brand tool maker is the closest published reference for general handling and use.
Frequently Asked Questions
Is this the same as a framing square?
Yes. "Carpenter square" and "framing square" describe the same 24 in. x 16 in. L-shaped layout tool; naming varies by manufacturer.
Aluminum or steel - does it matter?
Aluminum is lighter and won't rust, which is why it's common for rafter and roof layout. Steel squares hold their shape better under heavy daily use and are the usual choice for a shop that squares stock all day.