Canadian Owned & Operated Since 1964
Cut-N-Seal Sienna End Cut Wood Preservative, 946 mL
*Online Pricing Only
Cut-N-Seal Sienna End Cut Wood Preservative, 946 mL
Cut-N-Seal Sienna is a brush-on, copper-based, waterborne preservative for cuts and drilled holes in pressure-treated wood that expose untreated wood. The sienna (cedar) colour is made to match brown pressure-treated lumber.
Above-ground use only. It is not for preserved wood foundations, not for recoating treated surfaces and not a substitute for pressure treatment.
Features and Common Uses
- Copper-based, waterborne formula, low VOC and low odour
- Sienna (cedar) colour matches brown pressure-treated wood
- Ready to use, no dilution
- Cleans up with soap and water
Commonly used for:
- Sealing cut ends of treated deck boards
- Sealing drilled holes in railings and post tops
- Treating cut fence boards
Specifications
| Brand | Cut-N-Seal |
|---|---|
| Model | AA-574200 |
| Size | 946 mL |
| Colour | Sienna (cedar) |
| Finish | Semi-transparent |
| Formula | Copper-based, waterborne |
| Application | Brush on two coats; do not spray or dip |
| Application temperature | Above 10 C (50 F); keep from freezing |
| Clean-up | Soap and water |
Specifications from the Home Hardware listing for model AA574200. Source: Home Hardware Cut-N-Seal Sienna listing.
Frequently Asked Questions
Can I use it on posts in the ground?
No. It is for above-ground use only and is not a substitute for pressure treatment.
How do I apply it?
Brush on two coats to dry, clean wood above 10 C. Do not spray or dip.
How much does a can cover?
A 946 mL can seals about 330 ends of 5/4 x 6 deck boards or 220 ends of 2 x 6 deck boards with two coats.