Makita HP2010N 3/4 in. Hammer Drill
*Online Pricing Only
Makita HP2010N 3/4 in. Hammer Drill
Two-speed gearbox and a hammer-off setting on this corded 3/4 in. hammer drill, so the same tool drills masonry and then wood or steel without swapping. Industrial aluminum gear housing.
The chuck is 1/2 in. and keyed. A 3/4 in. concrete bit fits because those bits are made with a reduced 1/2 in. shank, which is worth knowing before you go looking for a bigger chuck.
- 3/4 in. capacity in concrete (low speed), 1/2 in. (high speed)
- 1-1/2 in. capacity in wood (low speed), 3/4 in. (high speed)
- 1/2 in. capacity in steel (low speed), 1/4 in. (high speed)
- Hammer and rotation, or rotation only
- Two speed, variable, reversible
- 1/2 in. keyed chuck
- Takes 3/4 in. concrete bits on a reduced 1/2 in. shank
- Depth setting rod
- Industrial aluminum gear housing
- Model HP2010N
Specifications
| Model | HP2010N |
| Capacity, concrete (low/high) | 3/4 in. / 1/2 in. |
| Capacity, wood (low/high) | 1-1/2 in. / 3/4 in. |
| Capacity, steel (low/high) | 1/2 in. / 1/4 in. |
| No-load speed (low/high) | 0-900 / 0-2,300 RPM |
| Blows per minute (low/high) | 0-18,000 / 0-46,000 BPM |
| Net weight | 6.4 lb. (2.9 kg) |
| Chuck | 1/2 in., keyed |
| Modes | Hammer and rotation, or rotation only |
| Speed | Two speed, variable, reversible |
| Gear housing | Industrial aluminum |
| Voltage | 120 V |
What's in the box
- HP2010N hammer drill
- 1/2 in. drill chuck (192877-8)
- Chuck key (763432-9)
- Side handle
- Depth rod
Questions
How does a 1/2 in. chuck take a 3/4 in. bit?
Concrete bits of that size are made with the shank turned down to 1/2 in. so they fit a standard chuck. The 3/4 in. is the cutting diameter, not the shank.
Can I turn the hammer off?
Yes. Rotation-only mode makes it an ordinary two-speed drill for wood and steel.
Is it a rotary hammer?
No. It is a percussion hammer drill, which hammers by a mechanical clutch rather than a piston. For heavy or repeated concrete work an SDS rotary hammer is the faster tool.