Canadian Owned & Operated Since 1964
Zinc-Plated A307 Threaded Rod 36 in. Long, 1/4 in. to 7/8 in. Diameter
*Online Pricing Only
Zinc-Plated A307 Threaded Rod, 36 in. Long
Zinc-plated A307 Grade A threaded rod in 36 in. lengths, stocked in five diameters from 1/4 in. to 7/8 in. Coarse UNC thread runs the full length of the rod, so it takes standard nuts and washers and can be cut to length with a hacksaw or grinder.
Zinc plating suits dry indoor and sheltered locations. For wet or corrosive exposure, use galvanized rod. Rods in other lengths are also stocked. Ask us for the length you need.
Features and Common Uses
- Carbon steel threaded rod to ASTM A307 Grade A
- Bright zinc plating for corrosion resistance indoors and in sheltered locations
- Full-length coarse UNC thread, 36 in. long
Commonly used for:
- Hanger rods for lighting, ductwork and shelving supports
- Anchor and tie rods in light framing and fixtures
- Cut-to-length stock for custom fabrication
Specifications
| Material | Carbon steel |
|---|---|
| Specification | ASTM A307 Grade A |
| Finish | Zinc plated |
| Diameter | 1/4 in., 3/8 in., 5/8 in., 3/4 in. and 7/8 in. |
| Thread | Coarse UNC: 1/4-20, 3/8-16, 5/8-11, 3/4-10, 7/8-9 |
| Length | 36 in. |
| Tensile strength | 60,000 psi minimum |
Grade, thread and length match the A307 zinc-finish threaded rod listing published by Lawson Products (item 10008, 3/4-10 x 36 in.). Confirm grade and finish on the bundle label before use in a load-bearing application. Source: Lawson Products threaded rod, item 10008.
How to Install
- Cut to length
- Thread the nut
- Tighten the assembly
Frequently Asked Questions
Can I cut this rod to length?
Yes. Use a hacksaw, cutoff wheel or grinder. Deburr the cut end and chase the threads with a die before use.
Do you stock other lengths?
Yes. This listing is the 36 in. length. Ask us for other lengths in the same diameters.
Is zinc-plated rod suitable outdoors?
Use it indoors or in sheltered locations. For wet or corrosive exposure, choose the galvanized rod instead.